How to Clean and Care for a Digital Measuring Spoon

Here's how to clean a digital measuring spoon without hurting it: take off the removable spoon head, clean it the way your included instructions describe, and only wipe the electronic handle while keeping it dry. The handle holds the scale and display, so water should never run over it or pool on it.

Part What to do What to avoid
Spoon head Remove it and clean it as your instructions describe Putting it back on while still wet
Handle and display Wipe with a soft, lightly damp cloth, then dry Rinsing, soaking or spraying
Buttons Wipe around them gently Letting liquid seep into the edges

Why the handle needs special care

A digital measuring spoon is two things in one: a regular spoon head and a small electronic scale in the handle. The spoon head is the part that touches food, which is exactly why it comes off. The handle holds the electronics, and electronics and water don't mix.

That's the one rule to remember. Clean the head on its own, and treat the handle like you'd treat a phone or a remote. A quick wipe is great. A trip under the faucet is not.

How to clean a digital measuring spoon after each use

  1. Tap out any leftover powder or seeds into the trash or sink.
  2. Remove the spoon head from the handle.
  3. Clean the spoon head following the instructions that came with your spoon.
  4. Dry the spoon head completely, including the area where it connects.
  5. Wipe the handle with a soft cloth that's barely damp, then go over it with a dry one.
  6. Reattach the dry spoon head.

Doing this after each sticky or oily job keeps buildup from forming. After dry ingredients like flour or sugar, a quick tap and a dry wipe is often all it needs.

Handling sticky, oily and staining ingredients

Honey, syrup and nut butter. These cling to the spoon head and can creep toward the handle. Remove the head soon after using it so nothing dries on.

Oils and fatty powders. Cocoa, ground nuts and some protein powders leave a film. Clean the head as directed and make sure it's fully dry so the next powder doesn't clump on it.

Strong spices. Turmeric and paprika can tint the surfaces they sit on. Clean the head soon after use rather than letting the color sit.

Powder on the display. A dry cloth or a soft brush clears dust from around the buttons. If you need moisture, put it on the cloth, not on the spoon.

Storing your spoon

Store it clean and completely dry. A drawer or a utensil holder away from the stove works well. Steam from boiling pots and heat from a hot oven door are worth avoiding, and so is the counter right next to the sink where splashes land.

Keep the spoon head attached or stored with the handle so it doesn't wander off. If you won't use it for a while, check the included instructions for any storage tips from the maker.

Common mistakes

  • Rinsing the whole spoon. It's tempting when your hands are already wet. Take the head off first, every time.
  • Reattaching a damp head. Moisture where the head meets the handle is exactly what you want to avoid.
  • Spraying cleaner on the display. Put any cleaner on a cloth instead, and check your instructions before using one.
  • Weighing right after cleaning. Let everything dry, then press tare so stray drops don't count toward your next reading.

If you're using a MeasureMate digital measuring spoon, the removable spoon head makes this routine quick. After cleaning and reattaching, press the tare button to zero the reading before your next scoop. For anything not covered here, the instructions included with your spoon are the final word.

Quick questions

Can I put a digital measuring spoon under running water?

Not the handle. Remove the spoon head and clean it as your instructions describe, and only wipe the handle with a barely damp cloth.

How do I get sticky residue off the handle?

Use a soft cloth that's lightly damp, wipe gently, and dry right away. Repeat a few times rather than using more water.

Why does my spoon read a little above zero after cleaning?

There may be leftover moisture or crumbs on the spoon head. Dry it fully, then press tare to zero the reading.

Care steps based on the maker's own guide included with your spoon.